This is an old revision of the document!
PWS2-30K-NA
| Item | Heading 3 |
|---|---|
| Row 1 Col 1 | Row 1 Col 2 |
| Row 2 Col 1 | some colspan |
| Row 3 Col 1 | Row 3 Col 2 |
| Utility-interactive Mode | |
| Battery charge/discharge voltage | 200V~750V (350~750V Full Power) |
| Battery charge/discharge current | 90A Max |
| AC voltage | 480V(423V~528V) |
| AC current | 36A |
| Nominal power | 30kW |
| AC frequency | |
| AC PF | Listed: 0.8~1 leading or lagging (Controllable) Actual: 0.1~1 leading or lagging (Controllable) |
| Stand-alone Mode | |
| Battery discharge voltage | |
| Battery discharge current | |
| AC output voltage | 480V(±5% configurable) |
| AC output current | |
| Nominal AC output power | 30kW(33kW max) |
| AC frequency | 60Hz |
| AC output PF | Listed: 0.8~1 leading or lagging (Load-depend) Actual: 0.1~1 leading or lagging (Load-depend) |
| Overload Capability | 105%~115% 10min;115%~125% 1min;125%~150% 200ms |
| Physical | |
| Cooling | Forced air cooling with replaceable fan module |
| Noise | <65dB |
| Enclosure | IP32/NEMA1 |
| Max elevation | 3000m/10000feet (> 2000m/6500feet derating) |
| Operating temperature | -20°C to 60°C (De-rating over 45°C） |
| Humidity | 0~95% (No condensing) |
| Size (W*H*D) | 470*660*176mm |
| Weight | 43kg |
| Installation | Wall-mounted |
| Other | |
| Peak efficiency | 97.3% |
| CEC efficiency | 96.5% |
| Protection | |
| AC connection | 3-Phase+N+PE /240V Split-phase (extra transformer required, derated to 17.3kW) |
| Isolation | Non-isolation |
| Certification | ETL listed conforming to UL1741/UL1741SA, CPUC RULE 21, IEEE1547 |
| Short circuit | |
| Peak short circuit current | 62A@20ms |
| Initial value of aperiodic current | 62A@100ms |
| Initial symmetrical short circuit current | 54A@250ms |
| Decaying component of short circuit current | 54A@500ms |
| Time to trip | 119ms |