This is an old revision of the document!
PWS2-30K-NA
| Item | Heading 3 | |
|---|---|---|
| Row 1 Col 1 | Row 1 Col 2 | |
| Row 2 Col 1 | some colspan | |
| Row 3 Col 1 | Row 3 Col 2 | |
| Utility-interactive Mode | ||
| Battery charge/discharge voltage | 200V~750V (350~750V Full Power) | |
| Battery charge/discharge current | 90A Max | |
| AC voltage | 480V(423V~528V) | |
| AC current | 36A | |
| Nominal power | 30kW | |
| AC frequency | ||
| AC PF | Listed: 0.8~1 leading or lagging (Controllable) Actual: 0.1~1 leading or lagging (Controllable) | |
| Stand-alone Mode | ||
| Battery discharge voltage | ||
| Battery discharge current | ||
| AC output voltage | ||
| AC output current | ||
| Nominal AC output power | ||
| AC frequency | 60Hz | |
| AC output PF | Listed: 0.8~1 leading or lagging (Load-depend) Actual: 0.1~1 leading or lagging (Load-depend) | |
| Overload Capability | 105%~115% 10min;115%~125% 1min;125%~150% 200ms | |
| Physical | ||
| Cooling | Forced air cooling with replaceable fan module | |
| Noise | <65dB | |
| Enclosure | IP32/NEMA1 | |
| Max elevation | 3000m/10000feet (> 2000m/6500feet derating) | |
| Operating temperature | -20°C to 60°C (De-rating over 45°C） | |
| Humidity | 0~95% (No condensing) | |
| Size (W*H*D) | 470*660*176mm | |
| Weight | 43kg | |
| Installation | Wall-mounted | |
| Other | ||
| Peak efficiency | 97.3% | |
| CEC efficiency | 96.5% | |
| Protection | ||
| AC connection | 3-Phase+N+PE /240V Split-phase (extra transformer required, derated to 17.3kW) | |
| Isolation | Non-isolation | |
| Certification | ETL listed conforming to UL1741/UL1741SA, CPUC RULE 21, IEEE1547 | |
| Short circuit | ||
| Peak short circuit current | 62A@20ms | |
| Initial value of aperiodic current | 62A@100ms | |
| Initial symmetrical short circuit current | 54A@250ms | |
| Decaying component of short circuit current | 54A@500ms | |
| Time to trip | 119ms | |