This is an old revision of the document!
PWS2-30K-NA
| Item | Heading 3 |
|---|---|
| Row 1 Col 1 | Row 1 Col 2 |
| Row 2 Col 1 | some colspan |
| Row 3 Col 1 | Row 3 Col 2 |
| Utility-interactive Mode | |
| Battery charge/discharge voltage | 200V~750V (350~750V Full Power) |
| Battery charge/discharge current | 90A Max |
| AC voltage | 480V(423V~528V) |
| AC current 36A | |
| Nominal power 30kW | |
| AC PF | |
Stand-alone Mode Battery discharge voltage 200V~750V (350~750V Full Power) Battery discharge current 90A Max AC output voltage 480V(±5% configurable) AC output current 36A Nominal AC output power 30kW(33kW max) AC frequency 60Hz AC output PF Listed: 0.8~1 leading or lagging (Load-depend) Actual: 0.1~1 leading or lagging (Load-depend) Overload Capability 105%~115% 10min; 115%~125% 1min; 125%~150% 200ms Physical Cooling Forced air cooling with replaceable fan module Noise <65dB Enclosure IP32/NEMA1 Max elevation 3000m/10000feet (> 2000m/6500feet derating) Operating temp. -20°C to 60°C (De-rating over 45°C） Humidity 0~95% (No condensing) Size (W*H*D) 470*660*176mm/ 18.5*26*6.95 inches Weight 43kg/95Lbs Installation Wall-mounted Other Peak efficiency 97.3% CEC efficiency 96.5% Protection OTP, AC OVP/UVP, OFP/UFP, EPO, AC Phase Reverse, Fan/Relay Failure, OLP, GFDI, Anti-islanding Configurable protection limits Upper/Lower AC Voltage/Frequency limit, Battery EOD voltage. AC connection 3-Phase+N+PE 240V Split-phase (extra transformer required, derated to 17.3kW) Isolation Non-isolation Certification ETL listed conforming to UL1741/UL1741SA, CPUC RULE 21, IEEE1547 Short circuit Peak short circuit current 62A@20ms Initial value of aperiodic current 62A@100ms Initial symmetrical short circuit current 54A@250ms Decaying component of short circuit current 54A@500ms Time to trip 119ms