This is an old revision of the document!
Firmware for module-based models
Since September 2018, Sinexcel is switching the HMI hardware from A8 to A7 (Don't panic, it's just coincidence that they are both named “A”, and they are different platform.), the hardwares are sent randomly.
To tell the difference:
- A8: All black when HMI initializing.
- A7: there will be a sitting penguin when HMI initializing.
When updating the firmware of the HMI, ENSURE updating the right firmware to the hardware.
Refer to Firmware updating instruction for more information
2019/07/19 08:14
- V1410 and V1420 can be updated into V1430, otherwise, update into V1429
- added SN register and hardware version register
2019/04/15 03:24
- Fixed some bugs
- Translation on the HMI optimized