This is an old revision of the document!
Firmware for module-based models
Since September 2018, Sinexcel is switching the HMI hardware from A8 to A7 (number is not related to performance), the hardwares are sent randomly.
To tell the difference:
- A8: All black when HMI initializing.
- A7: there will be a sitting penguin when HMI initializing.
<H1>When updating the firmware of the HMI, ENSURE updating the right firmware to the hardware. </H1>
Refer to Firmware updating instruction for more information
2019/04/15 03:24
- Fixed some bugs
- Translation on the HMI optimized