Old Revisions

These are the older revisons of the current document. To revert to an old revision, select it from below, click Edit this page and save it.

2021/09/21 23:27 manual:module-based:protocol_manual – [Muilt-string] ran_gao -1 B (current)
2020/09/16 22:16 manual:module-based:protocol_manual – external edit 127.0.0.1 ±0 B
2020/03/12 01:40 manual:module-based:protocol_manual – [What are Smart inverter functions] hedy ±0 B
2020/03/12 01:39 manual:module-based:protocol_manual – [Regulating Reactive Power] hedy ±0 B
2020/03/12 01:38 manual:module-based:protocol_manual – [Muilt-string] hedy ±0 B
2020/03/12 01:37 manual:module-based:protocol_manual – [Muilt-string] hedy ±0 B
2020/03/12 01:36 manual:module-based:protocol_manual – [Regulating Active Power] hedy ±0 B
2020/03/12 01:35 manual:module-based:protocol_manual – [Basic Operations] hedy +2 B
2019/08/21 03:23 manual:module-based:protocol_manual – [Battery dis-/charge boundary configuration] admin +1 B
2019/08/21 03:23 manual:module-based:protocol_manual – [Battery dis-/charge boundary configuration] admin +216 B
2019/08/12 20:03 manual:module-based:protocol_manual – [Muilt-string] admin -1 B
2019/08/12 20:02 manual:module-based:protocol_manual – [Basic Operations] admin -1 B
2019/08/12 04:55 manual:module-based:protocol_manual – [Battery dis-/charge boundary configuration] admin +7 B
2019/08/12 04:17 manual:module-based:protocol_manual – [Battery dis-/charge boundary configuration] admin +161 B
2019/08/01 23:01 manual:module-based:protocol_manual – [Battery dis-/charge boundary parameters] admin +3 B
2019/08/01 23:01 manual:module-based:protocol_manual – [Starting] admin +84 B
2019/07/31 23:16 manual:module-based:protocol_manual – [Muilt-string] admin -1 B
2019/07/31 23:15 manual:module-based:protocol_manual – [Muilt-string] admin -1 B
2019/07/31 23:13 manual:module-based:protocol_manual – [Which power designated?] admin ±0 B
2019/07/30 05:28 manual:module-based:protocol_manual – [Battery dis-/charge boundary parameters] admin +246 B
2019/07/30 05:24 manual:module-based:protocol_manual – [Battery dis-/charge boundary parameters] admin +342 B