====== Firmware for PWS2-30K (single-phase) ======
This firmware is to make the PWS2-30K to adapt to 480V single phase output.

===== 2021/4/29 DSP Version 207 ONLY!=====
  * Version: D207 for PWS2-30K single phase
  * Fixed some bugs
<WRAP center round download 60%>
{{ :manual:pws2-30k:pcs30_u1_v207.rar |Click to download}}
</WRAP>

===== 2021/1/13 HMI Interface ONLY!=====
  * Version: D200 for PWS2-30K single phase
  * Fixed some bugs
<WRAP center round download 60%>
{{ :manual:pws2-30k:pcs30single-dwin-v200.7z |Click to download}}
</WRAP>

===== 2020/3/18 HMI core ONLY!=====
  * Version: S30011 for PWS2-30K single phase
  * The "beep" warning can be turned off remotely now
  * When EMS channel is selected as RS485, the EMS can still read via Ethernet
<WRAP center round download 60%>
{{ :manual:pws2-30k:pcs30kw_app_v30011.zip |Click to download}}
</WRAP>


===== 2019/5/24 =====
  * Version: D206 C120 S3000 M200
  * When entering standby(idle) mode, the fans will stop rotation in 5 minutes

<WRAP center round download 60%>
{{:manual:pws2-30k:singlephasefirmwared206s3000m200.zip|Click to download}}
</WRAP>


===== 2019/4/15 =====
  * Version: D205 C120 S3000 M200
  * Added standby(idle) mode
  * Added fast off-grid operation function. The grid-tied to off-grid toggling is optimized. \\  When the grid outage occurs, just turn off the disconnect. And send “off-grid” register, the PCS will automatically clear the fault flags and start in grid forming mode. No need to send clear fault and start command, this will make the starting time 6~7 seconds.
  * Fixed some bugs

<WRAP center round download 60%>
{{ :manual:pws2-30k:singlephasefirmwared205s3000m200.zip |Click to download}}
</WRAP>