manual:pws2-30k:inverter_transport_and_storage [Sinexcel ESS knowledge base]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Transport and storage ======

During transport and storage of inverter cabinet, pay attention to the packing label on enclosure. Transport and storage should meet the following requirements: 
  * Do NOT dismantle external package of the inverter. 
  * Ensure there is no corrosive gas nearby. 
  * Storage temperature is maintained between -40℃~65℃, and relative humidity is maintained between 0%RH~95%RH. 
  * Dusty environment is not allowed. 
  * 3 layers are stacked at most. 
  * During storage, regular inspection should be conducted. If the packing material is damaged by worms or rats, it should be replaced in time. 
  * The storage location complies with firefighting requirement. 
  * After long-term storage, the inverter needs to be checked and tested by professionals before use.