how_to_integrate:common_files:start [Sinexcel ESS knowledge base]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Cabinet Models: Common files ======
===== Communication protocol =====
 <WRAP center round download 60%>
{{ :manual:module-based:储能监控与后台modbus通讯客户版本协议v211_20181115.xlsx |click to download}}
</WRAP>


  *[[:manual:module-based:protocol_manual|Protocol manual]]
===== Human-Machine Interface (HMI) =====
  *[[:HMI:]]

===== SOP in case of warnings or faults  ======
  * [[manual:module-based:SOP in case of warnings or faults|SOP in case of warnings or faults]]

===== Grid-support functions =====
  * [[manual:module-based:recommended grid support settings|Recommended grid-support settings]]

===== Firmware updating =====
  * [[manual:module-based:module-based_models_firmware_updating_instruction|Module-Based Models Firmware Updating Instruction]]
  * [[manual:module-based:Download firmware]]

===== Fault lists =====
  * [[manual:module-based:fault_list_of_ac_module|Fault list of AC module]]
  * [[manual:module-based:fault_list_of_dc_module|Fault list of DC module]]