Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== The inverter does not follow my remote commands ====== Check if you have set the inverter into **manual** or **local** mode? In **manual** or **local** mode, the inverter will respond to the query frames, such as asking for voltage, current, power, etc., but the inverter will not accept setpoints and commands. faq/the_inverter_doesn_t_follow_my_remote_commands.txt Last modified: 2020/09/16 21:42(external edit)