Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Clear fault flag ====== When fault occurs, the Sinexcel inverter will stop operation with fault reporting. In this case, the Sinexcel inverter will not response to a start command before fault flag is cleared. If the EMS finds that the Sinexcel inverter is in fault, the first thing is sending a stop regardless of the Sinexcel inverter status. Then several clear fault commands shall be sent to ensure it is not a fake fault. If the Sinexcel inverter cannot jump to standby mode after several clear fault commands, it means that something serious really happened. It’s recommended that the EMS sends a fault clear command every time before sending a start command, in case of there being a fault. definition/clear_fault_flag.txt Last modified: 2020/09/16 21:41(external edit)