Differences

This shows you the differences between two versions of the page.

--- manual:pws2-30k:safety_instructions [2019/01/09 04:54]
admin
+++ manual:pws2-30k:safety_instructions [2020/09/16 22:16] (current)
@@ Line 33: / Line 33: @@
   *   Improper equipment operation might cause electric shock, burn or contusion.
   *   Any system (equipment) damage caused by modification and disassembly without permission does not fall into the warranty scope.
 </WRAP>
- CAUTION
 ===== Safety instructions for mechanical installation =====
@@ Line 43: / Line 42: @@
 <WRAP center round warning 60%>
  **CAUTION**\\	Poor ventilation for installation will weaken the system performance!
-</WRAP>
 During equipment operation, the ventilation should be good. The equipment should be upright, and there should be no strong air current to prevent airflow so as to ensure that the device is cooled well.
+</WRAP>
 ===== Safety instructions for electrical connection =====
@@ Line 58: / Line 59: @@
 <WRAP center round warning 60%>
  **CAUTION**\\	All electrical installations should meet national/regional electrical standards;
-</WRAP>
 Grid-tied operation can be conducted after permission is obtained from local national/regional electric power department.
 Before power-on, please ensure that it is reliably grounded and the grounding meets local electrical standards.
+</WRAP>
 ===== Safety instructions for inverter operation =====
@@ Line 107: / Line 109: @@
 <WRAP center round warning 60%>
- **CAUTION**\\	Components might be caused by any contact with PCBs or other electrostatic sensitive components or improper operation.
+ **CAUTION**\\	Components might be damaged by any contact with PCBs or other electrostatic sensitive components or improper operation.
-</WRAP>
 Don’t touch the circuit boards.
 Abide by electrostatic protection specifications and wear anti-static wrist strap.
+</WRAP>
 ===== Others =====