Differences

This shows you the differences between two versions of the page.

--- manual:pws2-30k:manual_operation [2020/03/12 02:00]
hedy [Hardware parameters]
+++ manual:pws2-30k:manual_operation [2020/09/16 22:16] (current)
@@ Line 112: / Line 112: @@
 {{:manual:pws2-30k:image159_status_historical.jpg|}}
+<WRAP center round tip 60%>
 If the inverter is restarted or shut down due to power failure, the warning will still exist. After being powered on, the end time of warning will be expressed as “--/--/--”.
+</WRAP>
 Click **Logs** to enter the operation logs interface. This interface includes three columns: “number”, “message” and “Time before-after”. Click **<** and **>** under the interface to turn page up or down, click {{:manual:pws2-30k:image151_return.png|}} to return the main menu .
@@ Line 138: / Line 140: @@
+<WRAP center round important 60%>
 When the dispatched apparent power exceeds 30kVA, the output of active power will be restricted by reactive power, and the system will give priority to reactive output.
+</WRAP>
 <WRAP center round important 60%>
@@ Line 230: / Line 234: @@
 <WRAP center round warning 60%>
  WARNING
-Users can review hardware information in this interface, but they cannot set the parameters. Any loss arising from customers’ modifying the parameters in this interface will be undertaken by customers.
+ Users can review hardware information in this interface, but they cannot set the parameters. Any loss arising from customers’ modifying the parameters in this interface will be undertaken by customers.
 </WRAP>