Differences

This shows you the differences between two versions of the page.

--- manual:pws2-30k:communication_connection [2019/01/04 00:26]
admin
+++ manual:pws2-30k:communication_connection [2022/03/21 03:16] (current)
hedy [Bottom view]
@@ Line 1: / Line 1: @@
 ====== Communication connection ======
+===== Bottom view=====
+{{:manual:pws2-30k:微信图片_20220321142840.png?600|}}
+^No.	^Description^
+|1	|DC waterproof tube +	|
+|2	|DC waterproof tube -	|
+|3	|Ethernet waterproof terminal	|
+|4	|RS-485 waterproof terminal	|
+|5	|R-EPO waterproof terminal|
+|6	|AC waterproof tube|
+|7	|AC disconnect|
+|8	|Fan box|
-PWS2-30K-NA has two different communication interfaces: Ethernet and RS-485.
+PWS2-30K-NA has two different communication interfaces: Ethernet and RS-485, meanwhile, there is a remote emergency power off terminal.
+<WRAP center round tip 60%>
+At the same time, the PWS2-30K-NA can only be configured to communicate with the EMS via Ethernet, or RS-485, refer to HMI operation for more information
+</WRAP>
  ===== Ethernet cable connection =====
@@ Line 9: / Line 24: @@
 {{:manual:pws2-30k:image139_ethernet_cable.png|}}
+The pinout of a standard T-568B straight-through ethernet cable:
+^Pin^Color^
+|1|white/orange|
+|2|Orange|
+|3|white/green|
+|4|blue|
+|5|white/blue|
+|6|green|
+|7|white/brown|
+|8|brown|
   - Penetrate network cable whose insulating layer is stripped into the waterproof cap and insert it into RJ45 connector after being arranged in order;
   - Use wire crimpers to compress the connector;
@@ Line 14: / Line 40: @@
   - Insert the ready-made cable into Ethernet terminal.
-(2) RS 485 cable connection
+====== RS-485 cable connection ======
-PWS2-30K-NA can be connected to EMS through RS-485 to obtain battery information and energy dispatching command and complete automatic charging and discharging control and protection of energy storage system. RS-485 is connected through RJ45 connector. The definition of the pin of RJ45 connector is shown in Fig. 3 19. The connection steps are the same as Ethernet cable.
+PWS2-30K-NA can be connected to EMS through RS-485 to obtain battery information and energy dispatching command and complete automatic charging and discharging control and protection of energy storage system. RS-485 is connected through RJ45 connector. The definition of the pin of RJ45 connector is shown in the following image. The connection steps are the same as Ethernet cable.
 {{:manual:pws2-30k:image140_rs485_cable.png|}}
- The wiring making of RS-485 is the same as Ethernet cable. RJ45 terminal should be inserted into RS-485 port and cap shall be locked.
+====== Remote EPO connection ======
-(3) Remote EPO connection
 A remote EPO switch can be connected to the R-EPO RJ45 port.
 {{:manual:pws2-30k:image142_emergency_power_off.png|}}
- The wiring making of R-EPO is the same as Ethernet cable. RJ45 terminal should be inserted into the port\.
 <WRAP center round important 60%>
-THE R-EPO IS A NORMAL CLOSED CONTACT.IT SHOULD BE CONNCTED TO A NC SWITCH OR BUTTON.
+THE R-EPO IS A NORMAL CLOSED CONTACT. IT SHOULD BE CONNCTED TO A NC SWITCH OR BUTTON.
 IF NO REMOTE EPO IS NEEDED, PLEASE DISABLE THE EPO FUNCTION IN HMI.
 </WRAP>