hmi:settings

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
hmi:settings [2019/07/01 23:36]
admin [End of discharge voltage] 		hmi:settings [2020/09/16 21:42] (current)
Line 55: Line 55:
  
 ==== Active power regulation mode ==== ==== Active power regulation mode ====
-there are 3 modes supported in regulating active power+there are 4 modes supported in regulating active power
   * Constant active power\\  - the active power will be designated by the [[#active power setpoint]] directly   * Constant active power\\  - the active power will be designated by the [[#active power setpoint]] directly
   * Freq-Watt\\  - the active power will be designated by the [[#active power setpoint]] when frequency is in normal range, once the frequency rises beyond the range, the active power will reduce with the Freq-Watt slope    * Freq-Watt\\  - the active power will be designated by the [[#active power setpoint]] when frequency is in normal range, once the frequency rises beyond the range, the active power will reduce with the Freq-Watt slope 
  • hmi/settings.1562038583.txt.gz
  • Last modified: 2020/09/16 20:58
  • (external edit)