Differences

This shows you the differences between two versions of the page.

--- hmi:settings [2019/07/01 23:34]
admin
+++ hmi:settings [2020/09/16 21:42] (current)
@@ Line 55: / Line 55: @@
 ==== Active power regulation mode ====
-there are 3 modes supported in regulating active power
+there are 4 modes supported in regulating active power
   * Constant active power\\  - the active power will be designated by the [[#active power setpoint]] directly
   * Freq-Watt\\  - the active power will be designated by the [[#active power setpoint]] when frequency is in normal range, once the frequency rises beyond the range, the active power will reduce with the Freq-Watt slope
@@ Line 123: / Line 123: @@
 ==== End of discharge voltage ====
-if the PCS is discharging, once the voltage reaches this criteria, the PCS will stop and refuse to discharge.
+If the PCS is discharging, once the voltage reaches this criteria, the PCS will stop and refuse to discharge.
 ==== Precharge voltage (legacy) ====
 A legacy setpoint for lead-acid battery. If you are using lithium-ion battery, ignore this option