definition:standby_idle

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
definition:standby_idle [2018/12/25 00:47]
admin 		definition:standby_idle [2020/09/16 21:41] (current)
Line 10: Line 10:
  
 In the previous firmwares when standby(idle) mode was not implemented, the controlling software will compensate this 1.73kVAr reactive power with the PWM current whenever. But since the newest updating, when the active power is set to around 0, the software will enter standby(idle) mode to save energy, by stopping IGBT switching, so the reactive power generated by the capacitor filter can NOT be compensated. In the previous firmwares when standby(idle) mode was not implemented, the controlling software will compensate this 1.73kVAr reactive power with the PWM current whenever. But since the newest updating, when the active power is set to around 0, the software will enter standby(idle) mode to save energy, by stopping IGBT switching, so the reactive power generated by the capacitor filter can NOT be compensated.
 +
 There are two ways to enter or exit Standby (Idle) mode There are two ways to enter or exit Standby (Idle) mode
 ==== Manually ==== ==== Manually ====
  • definition/standby_idle.1545716876.txt.gz
  • Last modified: 2020/09/16 20:57
  • (external edit)