Differences

This shows you the differences between two versions of the page.

--- definition:standby_idle [2018/12/25 00:46]
admin
+++ definition:standby_idle [2020/09/16 21:41] (current)
@@ Line 1: / Line 1: @@
-====== Standby(idle) mode ======
+====== Standby (Idle) mode ======
-Entering Standby mode will NOT improve the speed of Starting the inverter, or the speed of Grid-tied/Off-grid toggling.
 The functionality of Standby mode is to stop the IGBT switching when the system is supposed to stop exporting or importing power to/from the utility grid, with an optimized power consumption in order to save energy.
+Entering Standby mode will NOT improve the speed of Starting the inverter, or the speed of Grid-tied/Off-grid toggling.
 =====PWS2-30K series=====
@@ Line 11: / Line 10: @@
 In the previous firmwares when standby(idle) mode was not implemented, the controlling software will compensate this 1.73kVAr reactive power with the PWM current whenever. But since the newest updating, when the active power is set to around 0, the software will enter standby(idle) mode to save energy, by stopping IGBT switching, so the reactive power generated by the capacitor filter can NOT be compensated.
 There are two ways to enter or exit Standby (Idle) mode
 ==== Manually ====