Differences

This shows you the differences between two versions of the page.

--- definition:clear_fault_flag [2018/12/20 21:13]
admin
+++ definition:clear_fault_flag [2020/09/16 21:41] (current)
@@ Line 1: / Line 1: @@
-====== clear_fault_flag ======
+====== Clear fault flag ======
- When fault occurs, the PWS2-30K will stop operation with fault reporting. In this case, the PWS2-30K will not response to a start command before fault flag is cleared.
+ When fault occurs, the Sinexcel inverter will stop operation with fault reporting. In this case, the Sinexcel inverter will not response to a start command before fault flag is cleared.
-If the EMS finds that the PWS2-30K is in fault, the first thing is sending a stop regardless of the PWS2-30K status. Then several clear fault commands shall be sent to ensure it is not a fake fault.
+If the EMS finds that the Sinexcel inverter is in fault, the first thing is sending a stop regardless of the Sinexcel inverter status. Then several clear fault commands shall be sent to ensure it is not a fake fault.
-If the PWS2-30K cannot jump to standby mode after several clear fault commands, it means that something serious really happened.
+If the Sinexcel inverter cannot jump to standby mode after several clear fault commands, it means that something serious really happened.
 It’s recommended that the EMS sends a fault clear command every time before sending a start command, in case of there being a fault.